Din985 Hex Nylon Insert Lock Nuts

Din985 Hex Nylon Insert Lock Nuts

The nylon nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut. It is a nut with a nylon collar insert that resists turning. The plastic insert is placed at the end of the nut, and its inner diameter (ID) is slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the applied radial compressive force. Nylock Hex Nuts retain their locking ability up to 250 °F (121 °C). Authorities disagree on whether nyloc Nuts should be reused.

Basic Introduction About Hyunto Nut
Wenzhou Hyunto Automobile parts Co.,Ltd is a professional and large scale company specializing in the production of all kinds of products including fasteners,Nut Parts,turning parts and non-standard parts. 
As an OEM, HYUNTO are able to produce CUSTOMIZED nuts under different standard(DIN, ANSI, GB, JIS, BSW, EN etc), by various materials(carbon steel, alloy steel etc), of size from M5 to M24.

A summary of the production process:

1.Wire - Uncoiled, straightened and cut to length.

2.Cold forging - Molding the steel into the right shape at room temperature.

3.Bolt head - Progressively formed by forcing the steel into various dies at high pressure.

4.Threading - Threads are formed by rolling or cutting.

5.Heat treatment - The bolt is exposed to extreme heat to harden steel.

6.Surface treatment - It depends on the application. Zinc-plating is common to increase corrosion resistance.

7.Packing/stocking - After quality control to ensure uniformity and consistency, the Bolts are packaged.

A summary of the production Testing